Mt3367 Android | Scatter.txt ^new^
The MT3367 Android scatter.txt is a small but essential component in the MediaTek firmware ecosystem. It’s a plain-text layout file used by flashing tools (SP Flash Tool and similar) to map Android partitions to physical addresses in the device’s flash memory. For anyone who flashes ROMs, unbricks devices, or customizes low-level device storage, the scatter file is vital — and MT3367 variants introduce a few device- and vendor-specific wrinkles worth knowing.
| Partition | Purpose | | :--- | :--- | | | Bootloader stage 1 (hardware init). Corrupt = brick. | | PGPT | Protective GPT (GUID Partition Table). | | UBOOT | LK (Little Kernel) – bootloader stage 2, handles display init. | | BOOTIMG | Kernel + ramdisk. | | RECOVERY | Usually minimal or missing (many MT3367 units have no recovery). | | SYSTEM | Android system image (often system.img in sparse format). | | USERDATA | User apps and data. | | CACHE | Temporary data (often merged with /data on these units). | mt3367 android scatter.txt
================================================ scatter_version:2.0 platform: MT3367 partition_index: SYS0 androidboot.hardware: mt3367 board_id: mt3367_board The MT3367 Android scatter
A scatter file for the MT3367 platform typically follows the standard. It defines the partition layout for the device's eMMC storage , listing approximately 24 distinct partitions. Key partitions defined in an MT3367 scatter file include: | Partition | Purpose | | :--- |
The MT3367 Android scatter.txt is simple in concept but critical in execution. For skilled tinkerers and repair technicians it’s an indispensable map — but it demands respect: accurate, device-specific scatter files and careful procedure separate a successful custom flash from a permanently bricked device. If you work with MT3367 devices regularly, build a workflow: extract and version-control original scatter files, verify checksums, document revisions, and keep a tested recovery plan ready.
The MT3367 Android Scatter.txt file typically contains information such as:
If an MT3367 device fails to boot (gets stuck on the logo or shows a black screen), it is often because a partition has been corrupted. The SP Flash Tool, guided by the scatter.txt , can overwrite the corrupt partition with a fresh image. Without the correct scatter file, the tool wouldn't know where to place the data, potentially overwriting critical security zones and permanently killing the device.