Viewerframe Mode Intitle Axis 2400 Video Server For About Better Access

A small retail chain was using an Axis 2400 to convert 4 analog cameras. Their old setup used default viewerframe mode (0). The cashier complained of a 1.5-second delay, causing missed theft events.

: Use Mode=Motion for a smooth Motion-JPEG stream or Mode=Refresh for static snapshots to save bandwidth. A small retail chain was using an Axis

A typical request to an Axis 2400 camera channel 1 might look like: http://192.168.1.100/axis-cgi/mjpg/video.cgi?camera=1&viewerframe=1 A small retail chain was using an Axis

uses the compression chip and ETRAX 100 processor to digitize up to four analog video streams simultaneously. A small retail chain was using an Axis

In the Axis HTTP API, the viewerframe mode influences:

: If your cameras support Pan/Tilt/Zoom, ensure your ViewerFrame includes the control applet by checking the Live View Config in the server settings. 🔒 A Note on Security